+39 (02) 9011 9921       info@atosbesana.it       via Milano 44/46 - 20090 - Cesano Boscone (MI)

Silicone rubbers for zinc alloys

in stock

ATOS BESANA s.r.l. produces different types of high quality and high temperature resistance silicone rubbers realised through a very equipped analysis laboratory for a continuous research and development of our products as the market requires and modern technologies.

We can group the different silicone rubbers in four families:

  • Silicone rubbers for zinc alloys (THT series with very high resistance to the temperature);
  • Silicone rubbers for lead/tin/bismuth alloys (MEX series);
  • Silicone rubbers for resins (with low vulcanisation temperature);
  • Silicone rubbers for lost wax (MCF series).

The standard vulcanisation temperature is normally 175/180°C but all our silicone rubbers can be realised at 120°C or 80/90°C on request.

The advantage of lower vulcanisation temperature is a lower shrinking during the vulcanisation cycle as well as the possibility to use resin, plastic, wood and wax models which normally have deformations and broking for higher vulcanisation temperature and pressure. See the following technical label :

VULCANISATION TEMPERATURE

VULCANISATION TIME

SHRINKING

SUGGESTION

175/180 °C

2 – 2,5 minutes for each mm. of thickness

3,0-4,0%

Standard vulcanisation pressure

120 °C

2,5 – 3 minutes for each mm. of thickness

2,0-2,5%

Low vulcanisation pressure

80/90 °C

3 – 3,5 minutes for each mm. of thickness

0,5-1,0%

Low vulcanisation pressure

Available besides a big range of casting and moulding accessories.

Contact us for more and detailed technical information.

Description

COLOUR
HARDNESS SHORES
APPLICATION
VULCANISATION TEMPERATURE
WHITE I 40 FOR INSERT
40 ± 2
Very high elongation, it is used like fixed/mobile insert in the harder rubber for very undercut pieces (supplied in roll or bulk)
180°C (on request 80/90°C or 120°C)
GP/AT HTM
51 ± 2
Very high elongation, it is used for very undercut pieces
180°C (on request 80/90°C or 120°C)
GREEN HTM
56 ± 2
High elongation, it is used for very undercut pieces, high resistance to the temperature
180°C (on request 80/90°C or 120°C)
BLUE HTM
58 ± 2
Good elongation, it is used for high undercut pieces, high resistance to the temperature
180°C (on request 80/90°C or 120°C)
YELLOW HTM
60 ± 2
Medium elongation, it is used for undercut pieces, high resistance to the temperature
180°C (on request 80/90°C or 120°C)
LIGHT-BLUE HTM
62 ± 2
Medium elongation, it is used for low undercut pieces, high resistance to the temperature
180°C (on request 80/90°C or 120°C)
PINK HTM
65 ± 2
Low/medium elongation, it is used for flat pieces with some details, high resistance to the temperature
180°C (on request 80/90°C or 120°C)
ORANGE HTM
66 ± 2
Low/medium elongation, it is used for flat pieces with some details, high resistance to the temperature (dryer than PINK THT)
180°C (on request 80/90°C or 120°C)
WHITE 65/2 HTM
66 ± 2
Low elongation, it is used for flat pieces and buckles, high resistance to the temperature
180°C (on request 80/90°C or 120°C)
IVORY HTM
71 ± 2
Very low elongation, it is used for very flat pieces, high resistance to the temperature
180°C (on request 80/90°C or 120°C)
WHITE SD HTM
78 ± 2
Very hard, it is used only for very flat pieces, high resistance to the temperature
180°C (on request 80/90°C or 120°C)

The silicone rubbers are normally supplied in a box of Kg. 25/30 containing discs of diameter and thickness requested from the customer.